ISO 7176-19 is an international standard that specifies impact testing methods for wheelchairs. This test is designed to evaluate the durability and safety of the wheelchair in impact situations to ensure that the wheelchair can withstand common impact situations without causing harm to the user.

The following are the general steps for ISO 7176-19 impact testing:

Test Equipment: Impact testing equipment is required, usually a mechanical device with controlled speed and impact force.

Impact area: Determine the area to be impact tested, usually the front, rear, sides, tires, etc. of the wheelchair.

Test speed and impact force: Set the test speed and impact force according to the requirements of the standard. These parameters may vary depending on the type and purpose of the wheelchair.

Test process: Place the wheelchair on the testing equipment and conduct impact testing according to the requirements of the standard. During the test, the test equipment will impact the wheelchair at a set speed and force.

Evaluate the results: Evaluate the durability and safety of the wheelchair based on the test results. This may include checking that the wheelchair is not damaged, that it is structurally sound, and that the wheelchair meets relevant safety standards.

It is worth noting that specific test methods and requirements can be found in the ISO 7176-19 standard document. These tests are usually performed by professional testing laboratories or institutions to ensure the accuracy and consistency of the tests.

How to determine whether a wheelchair meets the requirements of ISO 7176-19?

To determine whether a wheelchair meets the requirements of ISO 7176-19, the following steps are typically required:

Check the technical documentation of the wheelchair: The wheelchair manufacturer should provide technical documentation in compliance with ISO 7176-19, which should include information on the electromagnetic compatibility evaluation and test results of the wheelchair. You can request and review these documents to determine if your wheelchair meets the requirements.

Test Reports and Certifications: The wheelchair may have been tested for electromagnetic compatibility by a third-party testing agency. You can ask the wheelchair manufacturer to provide relevant test reports or certification documents to verify compliance with the requirements of ISO 7176-19.

Check for conformity markings: The wheelchair may be marked with conformity markings that meet relevant standards, such as the CE mark. This means that the wheelchair has been certified to meet specific standards. You can check the markings on your wheelchair to determine if it meets the requirements of ISO 7176-19.

Professional Assessment: If you need a more certain assessment, you can seek help from a professional agency or technical expert. They can carry out wheelchair assessment and testing to determine whether it meets the requirements of ISO 7176-19.

Wheelchairs complying with ISO 7176-19 requirements

Sunrise Moonlite

Karma KP31.2T